Excellent choice for maintenance free performance on timing and positive drive applications.
Specially developed cog configuration prevents slippage and ends variations in
speed. Wide range of load capacities and speeds. Efficient
performance from zero to 16,000 feet per minute with torque load capability from
inch-ounces to thousands of foot pounds. No lubrication required. So
you enjoy clean, maintenance free performance. Ideal for contamination
sensitive areas. Energy efficient. Doesn't require friction to
operate. Slack side tension is nearly zero and tight side tension is
minimal. Reduces overhung bearing loads. Improves motor life.
And, there's less heat build up.
Synchro-Cog is recommended as a replacement for drives where chain and gear can present problems. Ideal where drives are inaccessible making tension maintenance difficult. Or, anywhere that positive synchronization between drive and driven units is a must. Carlisle Synchro-Cog Timing Belts. The logical choice for clean, quiet, long-lasting, economical transmission of power.
More Reasons to Switch to the Synchro-Cog Timing Belt
 |
Perfect sync between driving and driven units |
|
|
Low maintenance |
|
|
Long life |
|
|
Clean |
|
|
Quiet |
Common Sizes
The following pages display the common sizes of each belt. Refer to the belt size chart for the correct cross section.
XL Section L Section H Section XH Section XXH Section Cotton Cleaner Timing Belts Long Length Timing Belts
Please contact an EBM representative at 1-800-356-9782 for more information regarding your power transmission needs.