Today's synchronous systems
require more horsepower, higher torque, lower speeds and smoother, more quiet
operation. The Carlisle Synchro-Cog RPP+Plus belt does all that and more.
It delivers positive, trouble free power transmission in high torque ranges
previously serviced only by chain or gear components. And, it provides a
degree of flexibility and design freedom never before available to the designer.
The "Plus" include a unique, patented nylon fabric cover over the belt teeth, that protects tooth surfaces and significantly improves surface wear resistance. By replacing standard deep-tooth high torque drive belts on existing drives with the same size RPP+Plus belt you can double belt life.
Using recommended sprockets provides up to 50% more horsepower capacity (8M & 14M thru 4956 pitch length only) compared to standard high torque drive belts. This increased horsepower capacity allows the drive designer to incorporate considerably smaller drive packages, reducing both drive cost and weight.
The efficient parabolic tooth profile and belt pitch are compatible with most deep tooth sprockets on the market today. The Carlisle Synchro-Cog RPP+Plus makes an ideal replacement for chain and gear drives
More Reasons to Switch to the Synchro-Cog RPP+Plus Synchronous Drive Belts
 |
High performance |
|
|
High torque |
|
|
Longer belt life |
|
|
Smaller, more compact packages |
|
|
50% more horsepower capacity in 8M and 14M |
Common Sizes
The following pages display the common sizes of each belt. Refer to the belt size chart for the correct cross section.
5M Section 8M Section 14M Section 20M Section Fin-Fan Belt Synchro-Cog Long Length RPP Belts
Please contact an EBM representative at 1-800-356-9782 for more information regarding your power transmission needs.