Clipper parts come many different ways.  It is impossible to list every part for every cleaner.  We have listed the following parts below as a general guideline to use when ordering parts.  Please contact and EBM customer service representative for assistance in selecting the correct parts for your cleaner.

    Click on the part to download an Adobe drawing showing the placement of the part.  You will need the latest version of Adobe Reader to view these files.  The Adobe Reader can be download by clicking on the Adobe logo.

Get Acrobat Reader

    Select the general area the parts are located on your Clipper Cleaner to be taken to a list of available parts.  If you have questions regarding the list parts please contact Ken or Dave at 1-800-356-9782 for assistance in selecting the correct parts.

Top Fan Section, Top Air Discharge Assembly, Bottom / Back Settling Chamber & Auger, Brush Adjusting System, Bottom Fan Assembly, Countershaft Assembly, Eccentric Shaft Assembly, Top Shoe Assembly, Bottom Shoe Assembly, Miscellaneous Parts

Top Fan Section

Item #

   Top Air Discharge Assembly Item #
1-15/16" × 79" Top Fan Shaft 5 Hinged Gate Weldment 22
1-15/16" Bore Pillow Block Bearing 10 # 8 Discharge Roll Assembly with Flanges 23
Adjusting Handle and Crank (28" Long For Top Air) 12 1" Bore Flangette Stampings 25
Adjusting Handle Shaft Bearing 4 1" Bearing 186
Back Air Damper With End Castings 16 Top Valve Shaft 1" × 70" 20
Front Air Damper With End Castings 17 Top Valve Shaft 1" × 50" 20
Universal Joint 1 Shaft Extension 1" × 12" 20
6" Threaded Screw With 5/8" Shank 9 Shaft Coupler 20
Swivel Plate (Bolts To Wood Side) 13    
Swivel Arm Pivot Lever 14 Brush Adjusting System Item #
High Static Fan Wheel Assembly With 8" Wide Blades 18

Brush Adjuster - Idler Side

 38
Right Side Top Fan Housing Assembly 215 Idler Arm Support 43
Left Side Top Fan Housing Assembly 215 Shoulder Bolt For Brush Adjusters 43A
Top Fan Bleeder Inlet Slide Assembly 15 Brush Adjusters - Control Side 39
Adjustments Handle With Spring 42
Bottom / Back Settling Chamber & Auger Item #   3" Rope Sheave Only With Bushing 46
Adjusting Lever With Spring Loaded Knob 26   Rope Sheave Axle With Hardware 50
Adjusting Plate (Mounts To Wood Side) 29   Rope Sheave Bracket Only 40
Wood Damper Assembly With End Castings 32   One Hole Plate With 1-5/8" Bore 41
Complete Auger Assembly for Left Hand Discharge 31   Straight Jack Plate 51
Shaft With Fighting 76-1/2" for Left Hand Discharge 28   Brush Carrier Assembly 25" With Rollers 54
Cleanout Door Latch 30   Brush Carrier Roller for 1-3/16" Shaft 53
1-3/16" Bore Flangette Stamping 36   Carrier Roller Axle With Hardware 56
1-3/16" Flangette Bearing 37 Brush Carrier Shaft 1-3/16" × 64" 48
Complete Auger Assembly for Right Hand Discharge 31   2 Piece Cable Clamps 55
Shaft With Flighting 76-1/2" for Right Hand Discharge 28   Rope Clamp Bracket With Tightner 57
         
Bottom Fan Assembly Item #   Countershaft Assembly Item #
Fan Shaft 1-1/2" × 79" 59   Countershaft 1-1/2" × 85-3/4" 73
3/8" × 5" Keys 71   3/8" × 5" Keys 84
1-1/2" Pillow Block Bearings 72   3/8" × 4-1/2" Keys 83
Bridgetree Mounting Angle For Bearing 62   1-1/2" Pillow Block Bearings 76
12" Diameter 1-1/2" Bore Stationary Disc 68   7475 Pillow Block Bearing Complete 74
12" Diameter 1-1/2" Bore Spring End Disc 69   12" Diameter 1-1/2" Bore Stationary Disc 79
10" Heavy Duty Spring 70   12" Diameter 1-1/2" Bore Thrust End Disc 78
Hand Nut For 1-1/2" Shaft 67   B-34 Thrust Bearing 75
Tapered Fan Entry Cones 61   1-1/2" Adjusting Nut 77
Wooden Fan Blades 60   Zerk With Plug For Adjusting Nut 24
Spider Fan Arms 63   12" Diameter 1-1/2" Bore Spring End Disc 80
Bottom Drum Iron 57-5/8" × 88" 201   10" Heavy Duty Spring 82
Drum Iron 57-5/8" × 26-3/4" 202   Hand Nut For 1-1/2" Shaft 81
Discharge Chute 4" 203   9" Diameter 1-1/2" Bore Spring End Disc 79
Breast Iron 57-5/8" × 24-1/2" 204   9" Diameter 1-1/2" Bore Stationary Disc 80
Drum Iron 57-5/8" × 22-3/8" 205      
      Top Shoe Assembly Item #
Eccentric Shaft Assembly Item #   Top Shoe Assembly Complete With Rockers 100
Eccentric Shaft 1-1/2" × 78" 85   Grain Deflector Door Complete 101
6714 1-1/2" Flange Bearing Conversion Kit 86   Grain Door Ends 188
1-1/2" Pillow Block Bearing 89   Front Shoe Hanger With Top Block 102
7475 1-1/2" Pillow Block Bearing Complete 87   Back Shoe Hanger With Top Block 103
7475 1-1/2" Halfmoon Bearing Complete 87   Shoe Hanger Support Block 105
12" Diameter 1-1/2" Bore Stationary Disc 93   Wood Cross Hanger Girt 104
12" Diameter 1-1/2" Bore Thrust Disc 92   Canvas Apron Assembly 92
1-1/2" Adjusting Nut 94   Right Shoe Side Wood Only 106
B-34 Thrust Bearing 88   Wooden Pitman Board 107
Steel Pitman Complete 90   Bridge Plate 4-3/4" × 55-3/16" 108
MR 20 Needle Bearing For Pitman 95   Shoe Bottom Metal 56-1/2" × 46-1/2" 109
MI 16 Inner Race For Pitman 98   Top Air Discharge Valve Metal Spout 110
Pitman Bushing 99   Front Grain Deflector Spout With 6" Rubber 111
Pitman Stud Bolt 97   Right Side Divided Sand Spout 130
Angle Iron Pitman Fasteners 96   Pinion Gear With 3/4" Bore 44
1-1/2" Throw Eccentric Assembly Complete 91   4" Long Rack 45
19" Flywheel 1-1/2" 177   Tilting Rod 3/4" × 60-1/2" 47
      Escutcheon Plate 49
Bottom Shoe Assembly Item #   3/4" Hex Nut 52
Bottom Shoe Complete With Rockers 424   Top Rocker Assembly Complete 115
Right Shoe Side 425   Right Hand Top Wooden Rocker Arm Only 145
Wooden Pitman Board 422   77" Metal Screenway Liner 153
Pitman Board Metal Cover 423   77" Metal Rubber Holding Strip 156
Bottom Shoe Metal 56-1/2" × 42-3/4" 440   77" Rubber Seal 2-1/2" Wide 159
Front Grain Deflector Door 134   Screen Stop 124
Front Hanger With Block - Both Sides 132   Screen Hook Assembly 144
Shoeside Hanger Support Block 137   Permanent Blank 121
Back Shoe Hanger With Block 133   Rocker Cups 175
Cross Girt Wood Hanger 136   Rocket Top Pipe Girt #8 177
Wood Sand Spout Track 433   Rocker Bottom Cross Brace #8 176
Metal Sand Spout Guide 432   Bottom Rocker Assembly Complete 116
Sand Spout 431   Right Hand Bottom Wooden Rocker Arm 145
Straw Spout 441   60" Metal Screenway Liner 153
Top Rocker Assembly Complete 437   60" Metal Rubber Holding Strip 156
Right Hand Top Wooden Rocker Arm Only 77" Long 438   60" Rubber Seal 2-1/2" Wide 159
77" Metal Screenway Liner 153   Grain Stop Apron Assembly 127
77" Metal Rubber Holding Strip 156   Rocker Cups 112
77" Rubber Seal 2-1/2" Wide 159      
Rocker Cup - Brush Screen Cleaning 175   Miscellaneous Parts Item #
Screen Hook Assembly 144   Hinged Side Spout Diverter 182
Grain Stop Assembly With Rubber 141   Inside Center Discharge Catchall Spout 183
Top Telescoping Apron Assembly 429   Outside Center Discharge Catchall Spout 184
Right Hand Bottom Wooden Rocker Arm Only (76") 145   Right Side 3 Position Catchall Holder 181
76" Metal Screenway Liner 153   Belt Idler Assembly Complete 5-1/2" 193
76" Metal Rubber Holding Strip 156   Idler Pivot Lever 178
76" Rubber Seal 159   5-1/2" Belt Take Up Shaft 191
Bottom Telescoping Apron Assembly 430   1" CI Pillow Blocks 179
Right Hand Bottom Wooden Rocker Arm Only (60") 145   Idler Sheave with Bushing 180
60" Metal Screenway Liner 153   Belt Tightner Axle With Hardware 185
60" Metal Rubber Holding Strip 156      
60" Rubber Seal 2-1/2" Wide 159      
Pinion Gear With 3/4" Bore 44      
4" Long Rack 45      
Escutcheon Plate 49      
Tilting Rod 3/4" × 60-1/2" 47      
3/4" Hex Nut 52

    Contact Ken or Dave for more information on the parts you need for your Clipper Seed Cleaner.  Please contact them at 1-800-356-9782 or ebmmill@ebmmill.com.

EBM Mill & Elevator Supply
 Copyright © 2001. All rights reserved.
 Revised: 12/14/04.

Home