U6-5000 Bucket Elevator Leg.
| Capacity (Based on free flowing material @85% bucket fill) |
5000 CFH 141 CMH |
| Short TPH @ 50lbs.per cubic foot | 125 |
| Short TPH @ 75lbs.per cubic foot | 187 |
| Belt speed | 290 FPM |
| Head shaft RPM | 90 RPM |
| Bucket Spacing | 6" |
| Head Casing | 10 Gauge sides with 7 Gauge n wear surfaces |
| Head shaft Diameter | 2-7/16" diameter to 100' |
| Head shaft Bearing | Ball Bearing Pillow Block, optional roller |
| Head Pulley | 12-3/8" diameter × 22" wide, vulcanized rubber lagging, QD hub |
| Buckets | 9" × 5½" plastic or steel two rows or 18" × 5½" steel, 20" × 5½ plastic optional |
| Belting | 21" wide PVC, rubber optional |
| Legging | 10 gauge single leg with angle iron corners |
| Boot Casing | 7 gauge steel |
| Boot shaft | 1-15/16" turned to 1-11/16" diameter |
| Boot shaft Bearing | Ball bearing take up unit |
| Boot Pulley | 12" diameter × 21" wide wing type |
| Construction | Carbon steel or Stainless Steel |
| Drive Package | Optional |
| Motor | Optional |