* Maximum lump size, 2.50"
| Capacity (Based on free flowing material @85% bucket fill) |
5625 CFH 159 CMH |
| Short TPH @ 50lbs.per cubic foot | 140 |
| Short TPH @ 75lbs.per cubic foot | 210 |
| Belt speed | 460 FPM |
| Head shaft RPM | 143 RPM |
| Bucket Spacing | 6" |
| Head Casing | 12 Gauge with angle iron frame and 7 Gauge rim |
| Head shaft Diameter | 1-15/16" to 40', 2-7/16"over 40', 2-15/16" optional |
| Head shaft Bearing | Ball Bearing Pillow Block, roller optional |
| Head Pulley | 12" diameter crown face with vulcanized rubber lagging |
| Buckets | 11" × 5½" plastic or 16 gauge steel |
| Belting | 12" wide PVC, rubber optional |
| Legging | 12 gauge single leg with corner angles |
| Boot Casing | 7 gauge |
| Boot shaft | 1-11/16" diameter |
| Boot shaft Bearing | Ball bearing take up unit |
| Boot Pulley | 12" diameter × 12" wide wing type |
| Construction | Carbon or 304 Stainless Steel |
| Drive Package | Optional |
| Motor | Optional |